فیلترها/جستجو در نتایج    

فیلترها

سال

بانک‌ها




گروه تخصصی










متن کامل


اطلاعات دوره: 
  • سال: 

    1398
  • دوره: 

    17
  • شماره: 

    3
  • صفحات: 

    153-164
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    775
  • دانلود: 

    163
چکیده: 

در این مقاله، یک ساختار جدید به همراه روش کنترلی، جهت بهبود عملکرد مدارات گرمایش القایی تشدیدی پیشنهاد شده است. در ساختار حاضر با ترکیب عملکرد یک مبدل نیم پل تشدیدی با قابلیت افزایندگی ولتاژ، کاهش بازدهی در توان های پایین و همچنین در توان های بالا، تا حد قابل قبولی جبران می شود. استفاده از تعداد کلید ها و دیودهای پایین، استفاده از خازن های با کیفیت بالا و ظرفیت پایین، کیفیت مناسب جریان ورودی و همچنین ضریب توان بالا عملکرد مناسب مبدل پیشنهادی را تضمین می کند. کلیدزنی کلیدهای فرکانس بالا در ساختار پیشنهادی به صورت کلیدزنی نرم انجام گرفته است و در نتیجه تلفات ناشی از کلیدزنی بسیار پایین است. در این مبدل، طراحی فیلتر ورودی جهت جلوگیری از تأثیرات تداخل الکترومغناطیسی انجام شده است. در نهایت، جهت نمایش عملکرد ساختار پیشنهادی، نتایج شبیه سازی و تجربی ارائه شده است.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 775

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 163 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1398
  • دوره: 

    48
  • شماره: 

    4 (پیاپی 85)
  • صفحات: 

    195-201
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    475
  • دانلود: 

    154
چکیده: 

همیشه بین مقادیر عددی، نظری و آزمایشگاهی کمیت های فیزیکی اختلاف وجود دارد که ناشی از خطاهای اندازه گیری است. هایپرترمیای الکترومغناطیس به وسیله ذرات میکرو/ نانو از این قاعده مستثنی نیست. این انحراف ها می توانند توزیع دما در کل ناحیه را تحت تاثیر قرار دهند. در این مطالعه انحراف هر یک از عوامل موثر در توزیع دما شامل غلظت، شعاع و ناحیه تزریق میکرو/ نانوذرات و همچنین قدرت و فرکانس میدان الکترومغناطیس در نظر گرفته شده و عدم قطعیت در مورد آن ها بررسی شده است. این بررسی بر اساس مطالعه عددی گرمایش القایی به وسیله میکرو/ نانوذرات مغناطیسی تحت میدان الکترومغناطیس در هایپرترمیا و با روش تفاضل محدود صورت گرفته است. نتایج نشان می دهند که بایستی در شرایط آزمایشگاهی اندازه گیری پارامترهایی نظیر قدرت میدان الکترومغناطیس، شعاع و ناحیه تزریق میکرو/ نانوذرات با دقت زیادی صورت پذیرد.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 475

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 154 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

Taheri Ali Asghar | TALATI FARAMARZ

اطلاعات دوره: 
  • سال: 

    2019
  • دوره: 

    9
  • شماره: 

    2
  • صفحات: 

    259-273
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    137
  • دانلود: 

    0
چکیده: 

Hyperthermia is one of the first applications of nanotechnology in medicine by using micro/nano magnetic particles that act based on the heat of ferric oxide nanoparticles or quantum dots in an external alternating magnetic field. In this study, a two-dimensional model of body and tumor tissues embedded is considered. Initially, the temperature distribution is obtained with respect to tumor properties and without the presence of an electromagnetic field. Then, the effect of the electromagnetic field on the temperature distribution is studied. The results are compared with those of other papers. The results indicate that the use of the electromagnetic field causes a significant rise in the tumor temperature; however, the risk of damage to the healthy tissues surrounding the cancerous tissue seems to be high. Then, the micro/nanoparticles are injected into the tumor tissue to focus energy on cancerous tissue and maximally transfer the heat onto the tissue. The temperature distribution in the state is compared with the case with no nanoparticles and other numerical works. The results demonstrate that with the injection of nanoparticles into the tumor, the maximum temperature location is transferred to the center of the tumor and also increases to 6° C. After determining the temperature distribution in the presence of nanoparticles, the effects of different variables of the problem are studied. According to the obtained results, the increase in the concentration and radius of nanoparticles have a positive effect on the temperature distribution in the tissue; on the other hand, the increase in the frequency and size of the electrodes have a negative effect. The relevant equations are solved numerically using the finite difference method.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 137

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources
نویسندگان: 

Shokri Abdol Jabbar

اطلاعات دوره: 
  • سال: 

    2024
  • دوره: 

    4
  • شماره: 

    1
  • صفحات: 

    21-26
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    23
  • دانلود: 

    0
چکیده: 

In this article, we investigate the effect of frequency as one of the important factors in the three-dimensional process of Induction heating through numerical modelling. Induction heating is the process of heating electrically conductive materials by electromagnetic Induction, which induces an eddy current within the material. Using the finite element method (FEM) and the comsol multiphysics software, we calculate the eddy current and the distribution of heat generated in both the workpiece and the inductor for different frequencies within the range of 0.75-5 kHz. To accomplish this, we utilize a real coil with a helix shape and a cylindrical workpiece. The results demonstrate that as the frequency increases, both the eddy current and the generated heat are transferred to the outer surface of the workpiece, becoming concentrated in a thin layer. In other words, these parameters exponentially decrease along the radius of the workpiece from the surface towards its interior.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 23

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1398
  • دوره: 

    29
  • شماره: 

    1
  • صفحات: 

    125-140
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    478
  • دانلود: 

    91
چکیده: 

زمینه مطالعاتی: نگهداری ماهی در یخ خرد شده باعث حفظ کیفیت غذایی و ترکیبات مغذی آن خواهد شد. آنزیم ها و میکروارگانیزم ها بلافاصله پس از صید شروع به فعالیت در ماهی نموده و باعث تولید ترکیباتی می کنند که منجر به فساد ماهی و غیر قابل مصرف شده آن می گردند. یخ خرد شده باعث نگهداری ماهی در بازار تا موقع مصرف می شود بدون اینکه ماهی منجمد شود. حتی اگر ماهی بلافاصله پس از صید با دقت و سرعت لازم منجمد شده و تحت شرایط مطلوب از نظر برودت و رطوبت در سردخانه نگهداری شود باز هم نمی توان مطمئن بود که محصول برای مدت نامحدود خصوصیات کیفی خود را حفظ می کند. اگر چه فعالیت باکتری ها در دمای حدود 10-درجه سانتی گراد متوقف می شود ولی، در موقع نگهداری ماهی صافی در فریزر، واکنش های شیمیایی (آنزیمی وغیر آنزیمی) حتی در 30-درجه سانتی گراد نیز به آهستگی ادامه دارند و در دراز مدت باعث تغییرات نامطلوب ارگانولپتیکی و کاهش وزن محصول و تغییرات چربی ماهی خواهد یافت. این فرآیندها منجر به بروز تغییرات ناخواسته ای در زمان نگه داری و در نتیجه کاهش کیفیت محصول می شوند. هدف: تاثیر مدت زمان نگهداری پس از صید بر ترکیبات مغذی و ارزیابی حسی فیله ماهی صافی )(Siganus javus در حالت یخ پوشی بررسی شد. روش کار: تعدادی 18 قطعه ماهی صافی سالم و هم اندازه پس از صید از سواحل بندر دیلم، به صورت تصادفی با میانگین وزنی 200± 3500 گرم انتخاب شدند. ماهیان به مدت 20 روز در داخل جعبه یونولیت در لایه هایی از یخ خرد شده به نسبت 1 به 1 و به ضخامت تقریبی 5 سانتیمتر قرار داده شدند. نمونه برداری از ماهیان پس از نگهداری در یخ در روزهای 1، 4، 7، 10، 13 و 20، انجام شد. جهت آنالیز ترکیبات مغذی و شاخص پراکسید نمونه ها، از روش استاندارد(AOAC, 2005) استفاده شد. برای اندازه گیری شاخص های ارزیابی حسی توسط پنج فرد ارزیاب آموزش دیده بر اساس روش لین و موریسی بررسی گردید. نتایج: نتایج حاصله نشان داد که ترکیبات مغذی تحت تاثیر دوره یخ پوشی تغییر می کند. دوره های مختلف یخ پوشی تاثیر معنی داری بر ارزیابی حسی فیله ماهی صافی داشت، به گونه ای که با گذشت زمان، کیفیت ماهی کاهش یافت. نتیجه گیری: بنابراین می توان نتیجه گرفت که یخ پوشی تا روز چهارم تحقیق مانع از فساد ماهی صافی شد. دوره نگهداری بر ترکیب مغذی ماهی تآثیر گذاشته و باعث کاهش چربی و خاکستر و افزایش رطوبت گردید.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 478

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 91 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1388
  • دوره: 

    -
  • شماره: 

    34 (ویژه نامه مهندسی برق)
  • صفحات: 

    39-50
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    8679
  • دانلود: 

    2363
چکیده: 

کوره القایی یکی از ابزارهای گرمایش بدون تماس مواد است. در این کوره ها از جریان با فرکانس بالا برای گرم کردن مواد هادی الکتریکی استفاده می شود. از آنجا که این روش بدون تماس است، لذا باعث آلودگی یا ایجاد ناخالصی در بار نمی شود. در طراحی سیستم اینورتر رزونانس موازی برای تغذیه کوره های القایی، انتخاب مناسب خازن برای مدار رزونانس بسیار مهم است. انتخاب این خازن بر فرکانس رزونانس، توان خروجی، ضریب قدرت، ضریب کیفیت و کارایی کوره اثر دارد. در این مقاله علاوه بر مدل سازی دقیق اینورتر و یکسوساز، روش مناسبی برای انتخاب مقدار بهینه خازن ارایه می شود؛ به گونه ای که علی رغم محدودیت ولتاژ اجباری موجود، بیشینه توان خروجی کوره و حداقل توان تلف شده در خازن حاصل شود. همچنین نقش مقاومت معادل سری خازن در انتخاب خازن بررسی می شود. در نهایت برای اجرای الگوریتم پیشنهادی، با تعیین خازن بهینه برای کوره ذوب، مدل کامل کوره و سیستم تغذیه آن شبیه سازی و اثر مقدار خازن پیشنهادی ارزیابی می شود.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 8679

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 2363 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources
اطلاعات دوره: 
  • سال: 

    1394
  • دوره: 

    24
  • شماره: 

    4
  • صفحات: 

    599-612
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    3325
  • دانلود: 

    707
چکیده: 

افزایش درجه حرارت فرآیند در روش معمول پاستوریزاسیون شیر جهت تکمیل و کفایت عمل در شیرهای آلوده، موجب سوختگی لایه های شیر در سطح جداره پاستوریزاتور و ایجاد لایه ضخیم سنگ شیر می نماید که این اتفاق علاوه بر ممانعت از انتقال حرارت کافی، با تولید ترکیبات سرطانزا، تغییر رنگ در شیر و بار میکروبی باقیمانده بالا، سلامت محصول را تهدید می کند. در روش حرارتی مورد استفاده در این تحقیق (روش القایی)، جریان الکترومغناطیسی به داخل شیر القاء شده و موجب داغ کردن سریع آن می شود. در این پژوهش، با استفاده از دستگاه مولد جریان القائی، شیر در 243 شرایط مختلف پاستوریزه شده و روش بهینه جهت فرآیند مکفی با به کارگیری طرح آزمایشی فاکتوریل انتخاب گردید. در این آزمایش اثر 4 عامل مختلف شامل سه شدت انتقال الکتریسیته (350، 1000 و 1600 وات)، سه سطح اتکای ظروف آزمایش (12، 17 و 23 سانتیمتر)، سه درجه حرارت (72، 75 و 84oC) و سه زمان پاستوریزاسیون (15، 20 و 30 ثانیه) با سه تکرار استفاده شد. انتخاب روش بهینه در سه مرحله به ترتیب بر اساس 1) کمترین درصد بار میکروبی باقیمانده، 2) کمترین زمان سپری شده برای پاستوریزاسیون و 3) کمترین انرژی مصرفی برای فرآیند برگزیده شدند. نتیجه مقایسه، %99.5 انهدام کل میکروبی در نمونه منتخب روش القایی و %98.23 در نمونه معمولی را نشان داد. ضمنا شمارش کلی فرم و اشرشیای باقیمانده در روش القایی یک دهم روش معمول بوده است و در روش القایی به دلیل سرعت رسیدن به درجه پاستوریزاسیون، سنگ شیر هم ایجاد نشد.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 3325

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 707 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

Jaafari Behzad | Namadmalan Alireza

اطلاعات دوره: 
  • سال: 

    621
  • دوره: 

    1
  • شماره: 

    1
  • صفحات: 

    42-49
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    12
  • دانلود: 

    0
چکیده: 

This paper presents a design procedure and a new control method for power regulation of series resonant Induction heating (IH) systems using a self-oscillating tuning loop. The proposed power regulator can accurately estimate the instantaneous phase angle and the main parameters of the resonant load. Moreover, the power control algorithm is devised based on a combination of Phase Shift (PS) and Pulse Density Modulation (PDM) methods. For simplicity, the tuning loop utilizes the PS control method for power regulation. Moreover, the Pulse Density Modulation (PDM) and frequency-sweep methods can be used in the proposed tuning loop. The new method is verified by a laboratory prototype with an output power of about 220 W and an operating frequency of about 60 kHz.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 12

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1402
  • دوره: 

    13
  • شماره: 

    3
  • صفحات: 

    105-121
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    171
  • دانلود: 

    14
چکیده: 

A B S T R A C T Temperature is one of the climate elements that has fluctuated a lot over time. When these fluctuations increase and decrease more than normal and are placed in the upper and lower regions of the statistical distribution, if continued, it can lead to the creation of heating and cooling waves. The purpose of this study is to analyze the temporal and spatial changes in heating and cooling waves in Iran during a period of 50 years. For this purpose, the temperature of 663 synoptic stations from 1962 to 2004 was obtained from the Esfazari database. Then, in order to complete this database, the daily temperature from 2004 to 2011 was obtained from the Meteorological Organization of the country and added to the aforementioned database. In order to perform calculations and draw maps, Matlab, grads and Surfer software have been used. The results of this study showed that the index of cooling waves and heating waves, while having a direct effect on each other, had an increasing trend in most of the area of Iran. The statistical distribution of the index of cooling waves is more heterogeneous than that of the index of heating waves. So that the spatial variation coefficient for cold waves is 84.22%. Also, the index of cooling waves has more spatial variability. The highest common diffraction of the index of heating and cooling waves has been seen in the northwest, east and along the Zagros mountains. Analysis of the indexes trends show that heat waves have intensified in 65.8% of Iran and the intensity of cold waves has decreased in 48.5% of Iran Extended Abstract Introduction Temperature is one of the major climatic variables, which it has a direct impact on different aspects of human life. It plays an essential role in the growth of crops and is considered a key driver of the biological system(Reicosky et al, 1988). It is associated with several types of extremes, for example, heat and cold waves which caused human societies maximum damage. Past occurrences of heat waves hitherto had significant impacts on several aspects of society. Have increased Mortality and morbidity. Ecosystems can be affected, as well as increased pressure on infrastructures that support society, such as water, transportation, and energy(Dewce, 2016). The long-term change of extreme temperatures has a key role in climatic change. The form of statistical distribution and the variability of mean values and also extreme event indicate a change in the region. It can be a small relative change in the mean as a result of a large change in the probability of extreme occurrence. Also, the variation in temperature data variance is significantly more important than the mean, for assessing the extreme occurrence of climate(Toreti and Desiato, 2008). The average surface temperature has increased the world between 0.56 and 0.92 ° C over the past 100 years(IPCC, 2007). Meanwhile, it was in the Middle East, the average daily temperature increased by 0.4-0.5 ° C in decades(Kostopoulou et al, 2014; Tanarhte et al, 2012). Considering that not many studies have been done in the field of spatio-temporal Variations of the heating and cooling waves thresholds in Iran, in this study, the spatio-temporal Variations of the heating and cooling waves thresholds in Iran during 50 years were examined and analyzed.   Methodology The daily temperature from the beginning of the year 21/03/1967 to 19/05/2005 was obtained from the Esfazari database prepared by Dr. Masoudian at the University of Isfahan. In order to increase the time resolution of the mentioned database, the daily temperature of observations from 05/21/2005 to 05/12/2012 has been added to the mentioned database using the same method, and the exact spatial resolution (15 x 15 km) is used as a database. Threshold indices of heating waves are the average numbers between the 95th and 99th percentiles, that is, the extreme hot threshold to the limit of excessively extreme hot. For extreme cool, from the 5th percentile down to zero is used. Of course, a condition was added to these thresholds, which is that these thresholds must be repeated two days in a row. These thresholds were extracted for each day in the 50 years of the study period and used as the original database. In order to analyze the relationship between cooling and heating waves, Pearson's correlation coefficient was used and regression was used to analyze the trend.   Results and discussion The average of cold waves was 5.26 ° C and for the heat waves is 30.20° C. Generally, if the temperature is upper or lower than this threshold, it is considered as hot or cold temperatures. A comparison of the median, mode, and average of cold waves with heat waves shows that the distribution is more heterogeneous for cold waves and its CV is 84.22%. In southern Iran, the average threshold heat waves are higher. This situation can be caused by the effects of subtropical high-pressure radiation, low latitude, and proximity to the sea. Though the threshold is higher in these areas, fewer fluctuations and changes are seen in the area. Heights moderate the temperature so they pose a minimum threshold for heat waves i.e. an iso-threshold of 25 ° C is consistent along the Zagros mountain chains, but in the west and east of Zagros Mountains, the threshold of heat waves is increased. Heat waves have increased in most areas of the country. So nearly 85 percent of the Iran has been an increasing trend, of which 65.8 percent is statistically significant at the 95% confidence level. Still, more areas of the country (60 percent) have a trend between 0.00828 and 0.00161. As can be seen, only 15% of the land area (including the southwest and northwest of the Country) had decreased heat waves. Cold waves, in most parts of the country, have a Positive Trend. However, about 25 percent of the study area's cold waves have a negative trend. they are located in areas higher than Latitude 30°. The largest decline of the wave's trend along the country is highlands. Nowadays, most of the country, has a trend between 0.01494 and 0.00828 ° C, respectively. Conclusion Common changes and effects of heat and cold waves had a direct relationship in many parts of the country. It is remarkable common variance in the East reached 55 percent, according to statistical significance. In some areas of the northwest and southwest, which have been impressive heights, the common variance is 40 percent. This common variance in mountains area has been high values. Investigation of heat waves trend shows that 65.8% of Iran significant positive trend and 7.1% significant negative trend. Also, the cold waves trend has indicated a 48.5% significant positive trend and a 10.8% significant negative trend. Climate change and global warming have changed the frequency and severity of temperature extremes. The present study, by examining the number of warm waves, concluded that the warm waves have increased in magnitude in 65.8% of the Iran zone. Also, the study of the cold waves trend showed that 48.5 percent of Iran had a positive trend, which means that the amount of temperature in the cold waves increased In other words, the severity of the cold has been reduced And only 10.8 percent of Iran had a negative cold wave trend And it shows the intensity of these waves is reduced.   Funding There is no funding support.   Authors’ Contribution The authors contributed equally to the conceptualization and writing of the article. All of the authors approthe contenttent of the manuscript and agreed on all aspects of the work declaration of competing interest none.   Conflict of Interest The authors declared no conflict of interest.   Acknowledgments  We are grateful to all the scientific consultants of this paper.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 171

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 14 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1403
  • دوره: 

    10
  • شماره: 

    1
  • صفحات: 

    1-16
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    16
  • دانلود: 

    0
چکیده: 

یکی از روش­های شناخته­شده در خصوص بازگشت خرابی­های مخلوط آسفالتی و در نتیجه افزایش طول عمر آن، خودترمیمی است که به­دلیل منافع متعدد آن همواره مورد توجه محققین بوده است. اِعمال انرژی حرارتی یا گرمایش مخلوط آسفالتی از طریق تسریع فرآیند ترمیم قیر به خودترمیمی مخلوط آسفالتی می­انجامد. دو شیوه اصلی گرمایش القایی و مایکروویوی در این زمینه به­کار رفته­اند. این مقاله سعی دارد که این دو روش ترمیم گرمایشی را با هم مقایسه و گزینه مناسب­تر را معرفی کند. برای این منظور، از هر دو روش گرمایش القایی و مایکروویوی برای اِعمال حرارت به اجزای تشکیل­دهنده مخلوط آسفالتی شامل قیر، فیلر و مصالح سنگی استفاده شده است. نتایج تحقیق نشان داد که نرخ گرمایش مایکروویوی ماستیک قیری حاوی مواد رسانا بیشتر از نرخ گرمایش القایی آن است؛ به­طوری که نرخ گرمایش مایکروویوی نمونه ماستیک حاوی 10 درصد وزنی پودر آهن (C/s° 100/0) بیشتر از سه برابر نرخ گرمایش القایی آن (C/s° 031/0) بوده است. بعلاوه، ماستیک قیری گرم­شده با مایکروویو دارای توزیع حرارتی یکنواخت­تری است که به خودترمیمی آن کمک می­کند. همچنین، گرمایش القایی قابلیت گرم کردن قیر فاقد افزودنی رسانا و سنگدانه­های فاقد مواد رسانا (که عمده سنگدانه­های مصرفی در این گروه­اند) را ندارد؛ در حالی که روش مایکروویوی برای گرمایش اجزای فاقد/دارای مواد رسانا قابل استفاده است. البته افزودن مواد رسانا می­تواند نرخ گرمایش مایکروویوی را افزایش دهد؛ به­طوری که افزودن 10 درصد وزنی پودر آهن به قیر توانست نرخ گرمایش مایکروویوی آن را از 083/0 به 100/0 افزایش دهد. از طرف دیگر، میزان انرژی مصرفی برای حصول نتایج یکسان در روش گرمایش القایی چندین برابر روش مایکروویوی است. از این­رو، استفاده از روش گرمایش مایکروویوی به جای گرمایش القایی برای ترمیم گرمایشی مخلوط­های آسفالتی توصیه می­شود.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 16

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
litScript
telegram sharing button
whatsapp sharing button
linkedin sharing button
twitter sharing button
email sharing button
email sharing button
email sharing button
sharethis sharing button